CPT and drilling rigs
CPT and drilling rigs
Anchors
The anchoring system of the Georig 220-11 device can be based on 2, 3 or 4 anchors and fastening accessories. The diameter of the anchors is 220 mm. Below and above the main anchor plate there are running blades, which facilitate screwing and unscrewing the anchor in difficult conditions, e.g. in the presence of stones. […]
Georig 504
Georig 504 is a universal drilling rig designed for geological and environmental research.
Geotech Georig 220-11
Penetrometer Georig 220 is designed for static sounding CPTU and other field penetration tests
Penetrometer 200 kN Geomil LYNX-200
The Lynx-200 penetrometer is mounted on a crawler chassis. The basic features are as follows: The rotating head with a high torque of 2 kNm allows for fast screwing in of large diameter plate anchors.
Penetrometer Geomil 200 kN Grizzly
The 200 kN Grizzly penetrometer is the latest design, built in a container on a truck. Practically any car with a permissible total weight of min. 23 vol.
CPT and drilling rods
The SpeedLock thread is a coarse thread with a double helix. CPT rods with standard conical thread
Geoprobe ® Model 6712 DT
Rig 6712DT folded. Model 6712DT unfolded Model 6712DT Specifications Augerhead Specifications
Penetrometer Geomil 100 kN Fox-100
The 100 kN static penetrometer Fox-100 manufactured by Geomil AB (Netherlands) is a good solution for companies performing CPT tests in weak and medium soils to a depth of several to a dozen or so m. The simplicity and reliability of the design, low weight, ease of loading and maneuvering in the field with a […]
CPT rigs
Geotech Georig 220-11
Penetrometer Georig 220 is designed for static sounding CPTU and other field penetration tests
Penetrometer 200 kN Geomil LYNX-200
The Lynx-200 penetrometer is mounted on a crawler chassis. The basic features are as follows: The rotating head with a high torque of 2 kNm allows for fast screwing in of large diameter plate anchors.
Penetrometer Geomil 200 kN Grizzly
The 200 kN Grizzly penetrometer is the latest design, built in a container on a truck. Practically any car with a permissible total weight of min. 23 vol.
Penetrometer Geomil 100 kN Fox-100
The 100 kN static penetrometer Fox-100 manufactured by Geomil AB (Netherlands) is a good solution for companies performing CPT tests in weak and medium soils to a depth of several to a dozen or so m. The simplicity and reliability of the design, low weight, ease of loading and maneuvering in the field with a […]
Penetrometer Geomil 200 kN Fox-200 Stand Alone
Penetrometer 200 kN Stand Alone is designed for mounting on User’s own platform.
Geotechnical & Geoenvironmental Drilling Rigs
Georig 504
Georig 504 is a universal drilling rig designed for geological and environmental research.
Geoprobe ® Model 6712 DT
Rig 6712DT folded. Model 6712DT unfolded Model 6712DT Specifications Augerhead Specifications
Geotech 605M
Georig 605M is the largest and most powerful set in the Geotech AB offer. It is equipped with a compressor with a capacity of 4.0 m3. The drill is supplied with a chain drill with a pressure of 8 tons. The standard equipment allows drilling in soil and rocks.
Parts and accessories
Accessories and complementary equipment for penetrometers and drilling rigs
Anchors
The anchoring system of the Georig 220-11 device can be based on 2, 3 or 4 anchors and fastening accessories. The diameter of the anchors is 220 mm. Below and above the main anchor plate there are running blades, which facilitate screwing and unscrewing the anchor in difficult conditions, e.g. in the presence of stones. […]
CPT and drilling rods
The SpeedLock thread is a coarse thread with a double helix. CPT rods with standard conical thread
In-situ soil testing systems
Electric conductivity adapter
Electric conductivity adapter allows for estimating the level of groundwater salinity and provides preliminary information on the presence of other contaminants in the ground.
Geotech Vane Tester EVT 2000 with slip coupling
The new version of the valued Geotech Vane Tester incorporates a slip coupling system mounted directly above the wings. This allows the wings to be pressed and rotated without casing rods and without a casing shoe using CPT rods and eliminates the friction component on the rods.
Dilatometer DMT
The flat dilatometer test – DMT – was developed in Italy by Silvano Marchetti. It was initially introduced in North America and Europe in 1980 and is currently used in over 40 countries. New control panel in robust plastic box. Automatic registration module included.
FFD – Fuel Fluorescence Detector
FFD measurement is usually performed with CPTU FFD survey confirmed with video cone Vertek’s downhole LED Fuel Fluorescence Detector (FFD) measures fluorescence produced by aromatic hydrocarbons when excited by ultraviolet (UV) light. Pushed with standard CPT equipment, the FFD significantly reduces the time required to detect and delineate the extent of hydrocarbon fuel spills or leaking storage tanks. Aromatic Hydrocarbon Molecular […]
Geotech NOVA CPT
General characteristics. The CPTU NOVA recording system consists of the following elements: CPTU cone, transmitter, microphone, interface, depth reader and cabling.The whole thing, together with the CPT-LOG program for recording measurements, works with any notebook computer equipped with the Windows /Windows 8/Windows 8.1/Windows 10/Windows 11 operating system. Wireless data transmission. Measurement data from the CPTU […]
Geotech SCPT-GS2
Geotech SCPT-GS2 measurement system for measuring the velocity of S and P seismic waves based on two 3-axial accelerometers
Seismic dilatometer SDMT
The seismic dilatometer is an accessory of the DMT dilatometer extended with a seismic module. It contains a double array of geophones spaced 0.5 m apart.
Geotech Electrical Vane Instrument
The Geotech Vane Tester cross probe enables the FVT (Field Vane Test) to be performed with full electronic recording of the shear. The EUROCODE model is equipped with a shoe protecting the wings during their insertion into the ground and a system of protective rods.
CPT related systems
Electric conductivity adapter
Electric conductivity adapter allows for estimating the level of groundwater salinity and provides preliminary information on the presence of other contaminants in the ground.
FFD – Fuel Fluorescence Detector
FFD measurement is usually performed with CPTU FFD survey confirmed with video cone Vertek’s downhole LED Fuel Fluorescence Detector (FFD) measures fluorescence produced by aromatic hydrocarbons when excited by ultraviolet (UV) light. Pushed with standard CPT equipment, the FFD significantly reduces the time required to detect and delineate the extent of hydrocarbon fuel spills or leaking storage tanks. Aromatic Hydrocarbon Molecular […]
Geotech NOVA CPT
General characteristics. The CPTU NOVA recording system consists of the following elements: CPTU cone, transmitter, microphone, interface, depth reader and cabling.The whole thing, together with the CPT-LOG program for recording measurements, works with any notebook computer equipped with the Windows /Windows 8/Windows 8.1/Windows 10/Windows 11 operating system. Wireless data transmission. Measurement data from the CPTU […]
Geotech SCPT-GS2
Geotech SCPT-GS2 measurement system for measuring the velocity of S and P seismic waves based on two 3-axial accelerometers
Marchetti Dilatometers
Dilatometer DMT
The flat dilatometer test – DMT – was developed in Italy by Silvano Marchetti. It was initially introduced in North America and Europe in 1980 and is currently used in over 40 countries. New control panel in robust plastic box. Automatic registration module included.
Seismic dilatometer SDMT
The seismic dilatometer is an accessory of the DMT dilatometer extended with a seismic module. It contains a double array of geophones spaced 0.5 m apart.
Non CPT related systems
Geotech Vane Tester EVT 2000 with slip coupling
The new version of the valued Geotech Vane Tester incorporates a slip coupling system mounted directly above the wings. This allows the wings to be pressed and rotated without casing rods and without a casing shoe using CPT rods and eliminates the friction component on the rods.
Geotech Electrical Vane Instrument
The Geotech Vane Tester cross probe enables the FVT (Field Vane Test) to be performed with full electronic recording of the shear. The EUROCODE model is equipped with a shoe protecting the wings during their insertion into the ground and a system of protective rods.
Instrumentation
PVT Membrane type piezometer
A closed type piezometer with a membrane sensor is used where the use of open piezometers is not possible, for example in conditions of artesian pressure.
Vertical inclinometer system INCLISONDE
Vertical inclinometer system INCLISONDE offered by Géo-Instrumentation is designed for monitoring horizontal displacements and deformations of soil, rock and retaining structures to determine: Inclinometer sensor is based on biaxial accelerometer. General properties of INCLISONDE Parameters of system INCLISONDE
Horizontal inclinometer INCLISONDE-H
Horizontal inclinometer INCLISONDE-H offered by Géo-Instrumentation is designed for monitoring vertical displacements and deformation of soil, rock and retaining structures to determine: General properties of INCLISONDE-H Parameters of system INCLISONDE-H
Piezometr typu PVT Direct Push
PVT Direct Push piezometers are designed for installation in the ground by pushing the rod column using a standard CPT penetrometer. The ceramic sensor used guarantees long-term stability. A/D converter, processor with optional log memory and battery are integrated in the probe. The signal on the surface can be read directly by connecting the piezometer […]
Géo-Instrumentation
Vertical inclinometer system INCLISONDE
Vertical inclinometer system INCLISONDE offered by Géo-Instrumentation is designed for monitoring horizontal displacements and deformations of soil, rock and retaining structures to determine: Inclinometer sensor is based on biaxial accelerometer. General properties of INCLISONDE Parameters of system INCLISONDE
Horizontal inclinometer INCLISONDE-H
Horizontal inclinometer INCLISONDE-H offered by Géo-Instrumentation is designed for monitoring vertical displacements and deformation of soil, rock and retaining structures to determine: General properties of INCLISONDE-H Parameters of system INCLISONDE-H
Geotech
PVT Membrane type piezometer
A closed type piezometer with a membrane sensor is used where the use of open piezometers is not possible, for example in conditions of artesian pressure.
Piezometr typu PVT Direct Push
PVT Direct Push piezometers are designed for installation in the ground by pushing the rod column using a standard CPT penetrometer. The ceramic sensor used guarantees long-term stability. A/D converter, processor with optional log memory and battery are integrated in the probe. The signal on the surface can be read directly by connecting the piezometer […]
Member of:
